WELDING PIPE EUQIPMENTS
You are hear : Home > Products > Welding Pipe Equipments
FX20 High Frequency
Welding Pipe Production Line
High frequency welding machine is a strip as raw material, after uncoiling, molding, high frequency welding, eliminate overip, sizing, straightening, cutting off a series of pipe forming process to produce complete sets of equipment or a variety of circular steel tube steel pipe line.

Roll forming is used to make the strip cold bending into round billet, and the welding seam is extruded to form round tube by high frequency induction heating. Various standard tubes and square tubes are produced after sizing.
PROCESS OF THE PIPE PRODUCTION LINE
MAIN TECHNICAL PERFORMANCE
Raw material Hot or cold rolled carbon steel strip, galvanized steel strip.
Pipe size scope Width of raw material 20 - 100mm
Round pipe outside diameter Φ7 - Φ32mm (±0.05mm)
Round pipe thickness 0.25 - 1.2mm
Square and other pipe thickness 0.25 - 0.8mm
High frequency induction welder power 60Kw
Production speed 20 - 110m/min
Total electricity power of the production line 120Kw
INTRODUCTION OF MAIN EQUIPMENT
NO. EQUIPMENT INTRODUCTION AND MAIN TECHNICAL PARAMETERSMANUFACTURER
（1） Raw material uncoiler It’s used to support the steel strip roll and feed raw material for the production line.
1) Structure mode Double working position
2) Material tray outer diameter Φ1500mm
3) Material tray inner diameter Φ350 - Φ550mm
4) Central height 900mm
5) Weight bearing 2000Kg
（2） Shearer and butt welder It’s used to weld together the tail of former material roll and the head of next roll to ensure the continuous production of pipes.
1) Shearing Responsible for shearing irregular parts of two material rolls and making preparation for welding.
2) Welding Responsible for connecting head and tail of two steel strip rolls.
（3） Vertical material accumulator It’s used to store and feed raw materials for the forming machine so that the machine can work continuously.
1) Power of driving motor 2.2Kw
2) Max thickness of steel strip 1.5mm
3) Max width of steel strip 200mm
4) Max storage capacity 150 - 300m
5) Max material feeding speed 150m/min
（4） Forming and sizing machine It’s the main equipment of the production line. Rollers can make steel strip form into pipes of variety shapes. It consists of forming part , welding part and sizing part.
1) Forming part Material feeding - Flattening - Feeding - 1 Horizontal roller - 1 Vertical roller - 2H - 2V - 3H - 3V - 4H - 4V - 5H - 5V - 6H - 6V - 7H - 7V
2) Welding part Seam direction guiding -Extruding - Welding - Weld burr removing - Water cooling
3) Sizing part 1V - 1H - 2V - 2H - 3V - 3H - 4V - 4H - 5V - 5H - Speed measuring - Straightening
4) Driving method 30Kw DC motors transmit power to gear boxes through reducer, then gear boxes transmit power to each horizontal roller through universal shafts.
5) Horizontal rollers Using gantry type integral frame. Diameter of horizontal shaft is Φ40mm and the material is 40Cr.
6) Vertical rollers Adjusted through lead screw. Diameter of vertical shaft is Φ25mm and the material is 40Cr.
（5） Computer flying saw With the high precision STD control system and quick reaction of mechanical system, the cutting saw has reliable synchronization performance and high precision cutting length.
1) Structure model Controlled by computer program
2) Max pipe diameter Φ35mm
3) Max pipe thickness 1.5mm
4) Error in length ±3mm
5) Power of cutting motor 4Kw
6) Power of driving motor 11Kw
7) Specification of saw piece Φ50×Φ400×2.5mm
8) Speed of saw piece 87m/s
（6） Automatic unloading platform platform It is an unloading platform of pipes cut by computerized saw. After the pipes falling down, workers can quickly check the quality and package them for preparation of transportation.
（7） High frequency induction appliances Using the current skin effect and proximity effect of high frequency to make both edges of the material rapidly heated to soldering temperature and then weld them together. Using computer to monitor the process can provide the machine with reliable quality.
（8） Rollers Due to reasonable design, high precision CNC machine process and advanced heat treatment technology, the pipe forming process is smooth, stability and high efficient.
ITEMS BUYER SHOULD PREPARE
•　Workshop to place the whole pipe production line (more than 30×4m²) and
　 high frequency appliances (more than 6×4m²).  

 

•　Power supply: The main electric source to high frequency room and production
　 line. Connecting wires from high frequency to the main machine

 

•　Water supply: Water pool (20m³) and one 2-inch self absorbing pumps (raising
　 distance more than 25m)

 

•　Several saw pieces of the computerized saw according to the specification.
•　Foundation of the production line to be constructed according to drawing.

 

 

•　Gas supply: one air-compressor (1.0m³/min)

 

 

•　One set of shearer and welder for connecting the head and tail of the material
　 roll. It could be oxygen-acetylene welding, argon arc welding or electric welding

 

•　Induction loop(Φ8×1 copper pipe self made) and magnet bar according to pipe
　 specification
MAINTENANCE & TRAINING
We can provide:
•　Onsite full assembly services 
•　Spare parts for maintenance demands
•　Free consultation of maintenance issues 
•　Oversea in/out country training program